Patio Cleaner: How to Use HR Total Power Clean for Fast, Safe Patio Cleaning
Imagine stepping outside tomorrow to a patio that looks new again no jet washer, no weekend lost, no mess. See what’s possible when you use a patio cleaner designed to lift algae, lichen/black spot and grime in about an hour, and that’s pet-safe once rinsed and dry. This guide shows you exactly how to use HR Total Power Clean, step by step.
Why patios look tired (and why you don’t need to pressure wash)
If you take pride in your outdoor space, a dull, patchy patio is frustrating. Algae creeps back, black spots refuse to budge, and pressure washing risks blasting out pointing or damaging softer stone like sandstone and limestone. We see this every week: modern patios—porcelain, sandstone, limestone, slate, travertine, granite and block paving—collect a cocktail of organic growth, oils, leaf tannins and soil. Cheap “spray and pray” cleaners only skim the surface; pressure washing spreads spores and drives dirt deeper.
HR Total Power Clean is a professional-grade patio cleaner that breaks down algae, lichen/black spot, grease and grime—fast. Used correctly, it lifts contamination so a light agitation and rinse reveal the original colour. Homeowners across the UK are choosing a targeted clean + rinse process over costly jet-wash sessions because it’s quicker, safer and lasts longer.
powerful results that feel 10× the value
From £42 (5L), one bottle mixes to 50–75L of working solution—enough for up to 150–250 m² depending on the surface. Expect visible results in about 60 minutes on common contaminants. No specialist machines needed; a soft broom, brush and hose will do. Cleaning more than one area? Our “Buy 3 for the price of 2” page keeps costs down while you protect the whole garden hardscape.
Quick Facts
-
Time to result: typically ~60 minutes dwell, then light scrub + rinse
-
Surfaces: porcelain, sandstone, limestone, slate, travertine, granite, block paving, concrete
-
Safety: pet/child safe once rinsed and fully dry; pre-wet/cover sensitive plants; rinse well afterwards
-
Dilution: see guide below (adjust for soiling and porosity)
-
Coverage: typically 3–5 m² per litre of mixed solution
Dilution & Coverage Guide
-
Light dirt / maintenance: 1:15–1:20 (cleaner:water) • ~4–5 m² per L mixed • Ideal for routine spring clean
-
General algae / green staining: 1:10–1:15 • ~3–4 m² per L mixed • Pre-wet plants, rinse well
-
Black spot / lichen: 1:5–1:10 • ~3 m² per L mixed • Allow full dwell time before rinse
How to use a patio cleaner (HR Total Power Clean) — step by step
- Prepare the area (5–10 min).
Sweep off loose debris. Move pots and furniture. Lightly pre-wet surrounding plants/grass. - Mix the cleaner (2–3 min).
In a watering can or pump sprayer, dilute according to the guide (e.g., 1L cleaner + 9L water for 1:10). - Apply generously (5–10 min).
Flood the surface so it’s evenly wet—don’t just mist. Focus on visibly stained or black-spotted areas. - Let it dwell (~60 min).
The product needs contact time. Keep the surface wet; if it’s warm or windy, re-mist with your mix so it doesn’t dry out. - Agitate lightly (3–5 min).
Use a soft/medium brush. No heavy scrubbing—you’re lifting softened contamination, not grinding it in. - Rinse thoroughly (5–10 min).
Hose or low-pressure rinse, pushing residues away from plants and drains. Avoid blasting pointing or edges. - Repeat stubborn spots (if needed).
For lichen/black spot, a second application at a stronger dilution may be required. Allow to dry fully.
Benefits you’ll notice
-
Removes algae and black spot without damaging pointing or etching stone
-
No jet washer needed—protects grout and edges
-
Fast: visible change in around an hour with simple tools
-
Deep cleans the surface so it stays cleaner for longer
-
Works on porcelain, sandstone, limestone, slate, granite and block paving
Proof it works
Claire, Hale: “I had black spots everywhere. One treatment and a light brush later, the slabs looked new.”
Paul, Wilmslow: “I’ve tried everything. This is the first cleaner that actually lifted the lichen without wrecking my pointing.”
FAQ
Is HR Total Power Clean safe for pets?
Yes—once the area has been rinsed and is fully dry. Keep pets away during application and dwell.
Will it damage plants?
Pre-wet surrounding plants/soil, avoid overspray, and rinse well afterwards. Cover sensitive plants if needed.
Can I use it on porcelain?
Yes. It’s excellent on porcelain and natural stone. Always test a small area first.
Do I still need to seal my patio?
Cleaning restores appearance; sealing (e.g., HR Colour Enhancer or HR Total Finish Matt) resists future staining and makes maintenance easier.
How often should I use it?
Most patios benefit from a spring clean and a quick refresh later in the year—frequency depends on shade, trees and foot traffic.
Ready to transform your patio?
Don’t replace it—restore it in an hour.
Shop HR Total Power Clean now.
UK-made • Next-day dispatch • Trusted by restoration professionals
HR Total Power Clean
Only £42 (5L) — mixes to 50–75L, covers up to 150–250 m²
-
Pro-strength formula → dissolves algae, lichen & black spots → skip the jet washer & protect your pointing
-
Works on porcelain & natural stone → one bottle for the whole garden → clean slabs, paths & steps consistently
-
Pet-safe when rinsed & dry → no worries after cleanup → peace of mind for families
-
Fast action (~60 mins) → minimal effort → get your weekend back
-
UK-made, next-day dispatch → no delays → start tomorrowt
Check out our page on how to use patio cleaner and much more
