Bring Back the Colour You See When the Stone Is Wet
If your natural stone looks richer when it rains but pale again once it dries, HR Colour Enhancer is designed to deepen the natural colour while adding impregnating protection to compatible porous stone.
- Enhances natural colour and stone variation
- Designed for compatible sandstone, slate, limestone and natural stone
- Coverage up to 20m² per 1L
- Available in 1L and 5L
- 10% off with code PATIOSEALER10
More Colour. More Definition. Still Natural Stone.
The product has to earn the click visually. These finished surfaces show the richer colour direction customers choose Colour Enhancer for.
The Value Is in the Finished Patio, Not the Container
Bring the Stone Back to Life
Richer reds, warmer golds and deeper greys become more visible once suitable stone is properly prepared and enhanced.
See the Individual Stones Again
When everything looks uniformly pale, much of the natural movement disappears. Enhancement helps the paving read as stone again.
Protect What You Have Improved
The product is not only about appearance. It also adds compatible impregnating protection to suitable porous surfaces.
Make Future Care Easier
Correct preparation and sealing are intended to reduce absorption and make ongoing maintenance more manageable.
30-second confidence check
Wet a Clean Section Before You Order.
If you prefer the deeper colour and stronger variation while the stone is wet, an enhanced finish is probably the direction you are looking for.
The final Colour Enhancer result varies with stone, porosity, preparation and previous treatments. Always test the actual product before treating the whole area.
Choose the Size and Get the Patio Protected.
You have already decided you prefer the richer finish. The next decision is simply how much product your project needs.
Clean. Dry. Test. Apply.
The full label gives the exact application instructions. The buying decision only needs four preparation principles.
Clean
Remove dirt, algae, cement residue and contamination before sealing.
Dry
Allow the stone to become suitably dry before application.
Test
Test the actual product on an inconspicuous area before treating the whole patio.
Apply
Follow the current product label for application, excess removal, drying and curing.
Before You Choose Your Size
Will it make the patio look glossy?
HR Colour Enhancer is intended to deepen natural colour rather than create a heavy plastic-looking coating. The exact finish varies by stone, so test first.
How much will the colour change?
Some stone responds strongly and some more subtly. Your own test area is a better predictor than another customer's photograph.
Should I buy 1L or 5L?
That depends on area and stone porosity. Use the current coverage guidance on the WooCommerce product page to calculate the quantity required.
Can I apply it over an old sealer?
Do not assume compatibility. Existing treatments can change absorption and appearance. Identify what is already present and test first.
What if I want the stone to stay pale and natural?
Then HR Colour Enhancer is probably not the right product. Return to the Natural Stone Sealers page and choose the matt route instead.
If You Prefer the Stone With More Colour, Choose Your Size.
HR Colour Enhancer is available in 1L and 5L. Buy the size that matches the project and test the actual stone before treating the complete surface.